Find the needle in Needle In A Haystack with five confirmed methods: hand search with the shovel and pitchfork, the conveyor + shredder + birds + detector line, the vacuum for cleanup, the magnet when the needle is near the surface, and the claw machine for surface or bale pickups. The most reliable mid-game line is detector + shredder + birds, placed at the start of the conveyor.
On this page
Hand searching
Use a wedge from the top down
Both the shovel and pitchfork only scoop the hay you are aimed at, so aim carefully instead of swinging at whatever is closest.
Done when: Visible wedge cleared from top to lower slope.
Watch for an unusual shape
As you clear ground, watch for any unusually shaped object; once you spot the needle, pick it up and wait for the extraction chopper.
Done when: Needle visible on the slope.
Avoid straight vertical shafts
The v1.1.0 single-heap campaign collapses and reseals tunnels, so vertical shafts do not stay open.
Done when: Slope worked, not a vertical shaft.
Detector line (shredder + birds + detector)
The deployable mid-game setup is a conveyor + shredder + birds + detector line. Place the shredder on the conveyor, then place the detector right before the shredder so it flags any bale that may contain the needle. After v1.0.8 the conveyor detector holds found nails on the belt until a player picks them up, so you do not have to babysit the belt for a needle that flashes past.
Wild birds are part of this line. A bird can pick up and fly off with the needle, so keep an eye on any bird that lands near your dig site; if a bird grabs the needle, you can knock it loose with a rock or with the laser. Place the detector in view of the needle stand and check at least one bird before assuming the needle is gone.
Other in-world helpers
- Vacuum
- Picks up dropped hay clumps; useful for cleaning up loose hay around the dig site so the needle is easier to spot.
- Magnet
- Pulls metal objects; works on the needle if it is close enough to the surface.
- Claw machine
- Easier to use after the v1.0.6 retune; can pluck the needle from the surface or from a bale.
- Reset Haystack button
- Appears in the campaign after you have found your first needle. Lets you reset the pile and try again on a new spawn.
How contracts and automation help
Contracts are one-shot per-run tasks such as "Dig a tunnel through the haystack" or generator and hay-amount quotas. They do not directly point at the needle, but the money from a completed contract funds your automation faster, and the Bale Press → Conveyor Detector line is what scales the search once you have cash.
Automation machines (drones, robot arms, robot vacuums, conveyor detectors, Bale Press, Hay Mixer, Hay Molder, Storage Silo, Belt Lift) all feed hay through the same detector line described above. They are not magic — they only help if the detector is correctly placed and the belt is moving bales past it.
When to give up and reset
If you have cleared a meaningful share of the pile, run the detector line for a full cycle, and no bird has the needle, it is faster to use the Reset Haystack button and try a fresh spawn than to keep sweeping the same hay. The button only appears after your first needle find, so on the very first run you may have to finish by hand.
